





Safety mats FS | 50 x 50 x 2,5 cm | brick red
Safety mats FS 2.5 cm brick red
The safety mats FS 50 x 50 x 2.5 cm in the color brick red ensure the necessary safety on play areas. The slabs are connected to each other with a system plug and can be optimally laid quickly on any solid surface, both in the cross joint and in the offset. The fall protection mats FS 2.5 cm in brick red are permeable to water and quickly dry again after rain. An underside drainage ensures rapid drainage of rainwater. The slabs do not seal the floor, are harmless to health and can be recycled at the end of their useful life.Advantages of safety mats FS 2.5 cm brick red
The plates are resistant to heat and cold. They isolate against vibrations, noise and cold, are break-proof and tear-resistant, slip-resistant and also water-permeable. Fall protection mats significantly reduce the risk of injury and breakage. Versatile areas of application such as on the playground in the garden, under the swing or as a gym, play or gymnastics area bring flexibility.Installation of safety mats FS 2.5 cm brick red
The safety mats are laid on a solid surface such as concrete, screed, wood, metal or tiles and secured by the system plug. If the fall protection surface is no longer needed one day, the panels can be easily dismantled and relocated to another location.Hardness: | 65 - 70 Shore A |
Cross density: | 780 kg / cbm |
Tensile strength: | 1 / A 71 N / mm² (DIN 53571/A) |
Breaking elongation: | 45 % (DIN 53571/A) |
Cold resistance to rupture: | no rupture (24 h / - 40° C) |
Cold durability: | no tears (65 Shore A) |
Surface resistance: | > 10 Ohm (testing voltage 1000V) |
Ozone tear durability: | no tears (48 h, 50 pphm, 25° 02/10% elongation) |
Destination soluble proportions: | gem. EN 71 |
Diathermancy coefficient: | 1,96 x 10 m/s exseeds value approx 3,6-fache |
Heat conductivity value: | 0,08 W/m`k |
Durability: | acid and solution resistant |
Unfortunately there are no review yet. Be the first who rate this product.